Simcenter CFD and FSI simulations help maximize the operational efficiency of chemical reactors.
 
Maximizing throughput and capacity—these are always amongst the goals of chemical reactor design & analysis engineers, to minimize total operational cost. Multiphysics 3-D Computational Fluid Dynamics (CFD) simulations can improve the reactor design and optimize operations by modeling all relevant phenomena, including fluid flow in complex geometries, heat transfer, hydrodynamic agitation, fluid-structure interaction (FSI), and more. 
 
In this webinar, Nicolas Perret (Senior CFD Modeling Engineer at Solvay) will present the process by which Solvay was able to leverage the flexibility, customizability and robustness of Simcenter STAR-CCM+ to  improve the thermal performance of a chemical reactor while simultaneously addressing mechanical design constraints, resulting in improvements to overall throughput & capacity. 
 
Simulations performed with a calibrated in-house 2-phase condensation model enabled the evaluation of the performance of condensing thermal fluid heating coils. These simulations provided the insight that guided the redesign of heating coil systems with improved thermal performance, leading to a significant decrease in batch duration. 
 
In addition, design modifications to the agitator were validated using the FSI capabilities in Simcenter STAR-CCM+. The coupling of hydrodynamic prediction and mechanical resistance calculations enabled the Solvay engineers to validate the increased reactor capacity. 
 
The webinar will also provide an overview of the key requirements of reactor modeling and the capabilities in Simcenter STAR-CCM+ that address them.
 
Speakers: 
 
- Dr. Ravi Aglave, Director, Energy & Process Industries at Siemens Digital Industries Software
- Nicolas Perret, Senior CFD Modeling Engineer, Solvay

Hora

13:00 - 14:00 hs GMT+1

Organizador

Siemens
Compartir
Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Octubre / 2025 396 webinars
Lunes
Martes
Miércoles
Jueves
Viernes
Sábado
Domingo
Lun 29 de Octubre de 2025
Mar 30 de Octubre de 2025
Mié 01 de Octubre de 2025
Jue 02 de Octubre de 2025
Vie 03 de Octubre de 2025
Sáb 04 de Octubre de 2025
Dom 05 de Octubre de 2025
Lun 06 de Octubre de 2025
Mar 07 de Octubre de 2025
Mié 08 de Octubre de 2025
Jue 09 de Octubre de 2025
Vie 10 de Octubre de 2025
Sáb 11 de Octubre de 2025
Dom 12 de Octubre de 2025
Lun 13 de Octubre de 2025
Mar 14 de Octubre de 2025
Mié 15 de Octubre de 2025
Jue 16 de Octubre de 2025
Vie 17 de Octubre de 2025
Sáb 18 de Octubre de 2025
Dom 19 de Octubre de 2025
Lun 20 de Octubre de 2025
Mar 21 de Octubre de 2025
Mié 22 de Octubre de 2025
Jue 23 de Octubre de 2025
Vie 24 de Octubre de 2025
Sáb 25 de Octubre de 2025
Dom 26 de Octubre de 2025
Lun 27 de Octubre de 2025
Mar 28 de Octubre de 2025
Mié 29 de Octubre de 2025
Jue 30 de Octubre de 2025
Vie 31 de Octubre de 2025
Sáb 01 de Octubre de 2025
Dom 02 de Octubre de 2025

.

  • Comparativas de Software

    ¿No te salen las cuentas en la nube?

    La nube tiene importantes ventajas: ahorros de costes, facilidad para trabajar en equipos remotos, menor necesidad de administración de la infraestructura, mejoras de seguridad, etc. Sin embargo, al comentar con algunos clientes la posibilidad de migrar las licencias de Atlassian a cloud, me comentaron que habían hecho alguna experiencia de migración y no le salían tan bien las cuentas. Estos comentarios me hicieron reflexionar sobre cuáles podían ser las causas de que no salieran las cuentas y permitirme ofrecer algunas recomendaciones y consejos. ... Leer más

    Publicado el 22-Dic-2021 • 14.40hs

    0 comentarios

  • TODOS Comparativas de Software PDF

    Comparativas de software ERP para todos los sectores

    Publicado el 27-Set-2021 • 12.50hs

  • TODOS Comparativas de Software PDF

    Comparativas de software ERP para Fabricación

    Publicado el 27-Set-2021 • 09.51hs

.

.

.

.

.

Más Secciones »

Hola Invitado